Boat Rebuilding

DR. J - Meet the Fleet

Phase I Phase II
  1. Condition of Boat Before Rebuild Project
  2. Patching, Repairing and Priming
  3. Rebuilding Rudder
  4. Removing the Stern Drain Tubes
  5. Stiffening Cockpit Floor for New Barney Post
  6. New Paint and Polished Keel
  7. Inspection Port Covers
  8. Installing Forestay Turning Block
  9. Replacing the Old Rubrail
  10. Applying Non-Skid to Rubrail
    1. Drawing Outline of Non-Skid Tape on Deck
    2. Masking Off Area to be Coated with Contact Cement
    3. Applying Non-Skid Tape
  11. New Gasket for Lazarette Cover
  12. Rebuilding Mast
    1. Installing New Jib Halyard Sheave
    2. Installing T-Ball Plate for Forestay
  13. Rebuilding Trailer
    1. New Tie-Downs
    2. Safety Chain
    3. Wiring for Lights
  14. Completion of Phase I

Dominic the Submariner
  1. Backstay Crane for Mast
  2. Building Mast Step
  3. Guide Tube for Forestay Extension
  4. Installing Foam Blocks
  5. Installing Mast Collar
  6. Installing Mast Partner
  7. Installing Mast-Bender Controls
  8. Jib Halyard Tensioning System
  9. New Main Halyard Sheave
  10. Rebuilding Mast Partner
  11. Spinnaker Bags
  12. Support Plate for Cleats
  13. Support Struts for Bridge

Rebuild at Finco Fabrication

BREAKTHROUGH - Meet the Fleet

Phase I Phase II
  1. Hatches and Covers
  2. Painting Primer, First Day
  3. Painting Primer, Second Day
  4. Past Names
  5. Some Steps to Follow
  6. Traveler Bridge
 7. Boom Vang - Mast Attachment
8. Cover for Roller Furling Well
9. Gasket for Lazarette Cover
10. Installing 4x1 Traveler Controls
11. Installing Block and Tackle for Tensio… Jib Halyard
12. Installing Cleats on Bridge
13. Installing Compasses
14. Installing Cover for Bow Compartment
15. Installing Forestay Extension
16. Installing Inspection Port Covers
17. Installing Jib-Sheet Leads
18. Installing New Compasses
19. Installing New Jib Sheet Cleats and Turning Blocks
20. Installing New Spinnaker Halyard Reel
21. Installing New Traveler
22. Installing New Traveler Car and Controls
23. Installing Pad Eye for Bow Line
24. Installing Spinnaker Bags
25. Installing Spinnaker Halyard
26. Installing Spinnaker Sheet Cleats
27. Installing Spinnaker Sheet Turning Blocks
28. Installing Tails Bag
29. Installing Topping Lift and Jib Halyad at Bridge
30. Jib Halyard Tensioning System
31. Launching Rebuilt Boat
32. Mast Partner and Lever
33. New Barney Post
34. New Boom
35. New Spinnaker Pole
36. Pole Down Haul
37. Stretch Cord for Tiller
38. Trapeze Handles
39. Traveler Control Lines
40. Traveler End Blocks
41. Turning Blocks - Base of Mast
42. Turning Pole Downhaul
43. Twing-Line Controls

LONG TERM AFFAIR - Meet the Fleet

Phase I  
  1. Coming Soon

ARABESQUE - Meet the Fleet

Phase I  
  1. Coming Soon